Instructions for authors

Journal of Al-Qadissiyah for Engineering Sciences is a scientific journal published by the Faculty of Engineering / University of Al-Qadissiyah.

Regular Articles  

تحميل تعليمات النشر باللغة العربية تعليمات النشر عربي

  1. The journal publishes results of various researches from both inside and outside Iraq – all the researches subject for a peer review where the researches are classified as follows:
  2. Original researches that include basic and practical results.
  3. Condensed articles (Short communication) that give some preliminary results of researches are still ongoing. These articles should not exceed 500 words and their contents should follow the basic research dissemination preamble.

2 – All manuscripts submitted for consideration of publication in this journal must not have been published or accepted for publication elsewhere

3 – All manuscripts submitted for consideration of publication in this journal must be in three original copies or send via the journal E-mail.

4 – All manuscripts submitted for the publication in this journal must be printed via Microsoft Word 2010 system and they must not exceed 20 pages including all tables and figures and indexes

 

A – The manuscripts written in English should be arranged as follows: –

The paper margin 2 cm from each side
Font style Times New Roman
Empty space

 

Five lines (single space) should be left empty after the supreme footnote of the first page (counting the small size of the character 12)
Title of the paper Uppercase size 16 (bold )
Name or names of the authors and e-mails Lowercase 11 (bold )

 

Headlines Uppercase size 12 (bold) and placed directly after the left edge.
Subtitles

 

Lowercase size 12 (bold) at the beginning of each word and uppercase character placed directly after the left edge
Do not forget Must leave one empty line before the main title or subtitle
Text Lowercase size 12, paragraph: single space
Equations Must be numbered in brackets directly to the right of the footnote and without points due to the numbers and equations mediate. Leave one blank line before and after the equation and the equation is referred to within the text as follows … (x) , where x mean number equation
Figures and tables

 

Must be referred to in the text in bold and the title must appear under the Figure in lowercase letters size 12. The title of Table must appear above the table written in lowercase letters size 12, and a blank line must be left before and after the title of the table.
References References should be printed together at the end of the manuscript in alphabetical order. A single line should be left before and after each reference.
Abstract All manuscripts should start with a summary of no more than 200 words written in lowercase letters size 12, and should fit well with the title of the manuscript and summarize the research’s objective, content , results and conclusions.
keywords Abstract of the manuscript should follow with five up to ten keywords related to the main topic of research written in lowercase letters size 12 (bold).
Symbols

 

If the manuscript contains any symbols so they should be arranged alphabetically and written in Latin characters followed by Greek characters, For example ATC: Area Traffic Control

 

 

  1. The manuscripts written in the Arabic should be arranged as follows: –

 

Print style Simplified Arabic
Empty field (spacing)

 

Six lines (single) with size 14 should be left empty after the supreme footnote on the first page.
Additional Title and Summary In addition to the Arabic title and Abstract, the manuscript submitted to the journal should provide with an English Abstract and title as well.
Title of the paper Characters size 18 dark
Name or names of the authors Should be written in English letters and small size 11 (bold).
Headlines Write in letters size 16 (bold) and placed directly after the right edge.
Text Should be written in letters size 14 and a single space paragraph.
Figures and tables

 

Should be referred to in bold letters size 14.

Title of Tables should appear above the table at the center, printing in letters size 14 and should leave one line blank space before the title of the table.

References References should be written together at the end of the manuscript in Latin characters followed by Arabic letters in alphabetical order.
The manuscript should start with a summary of no more than 200 words written in English lowercase letters size 12.
Keywords Five up to ten keywords written in letters size 14 (bold) should be followed the abstract, related to the primary topic of the research.

 

C – The manuscript submitted to the journal should be arranged as follows:

  • In the first page: write the title of the paper and names, addresses and E-mail contacts of the authors in the primary language of the paper.
  • Abstract and keywords come after the title.
  • Afterwards, title of the paper and all other details mentioned above should reprint in the secondary language.

 

5 – Al-Qadisiyah Journal of Science and Engineering will have copyright of the papers.

 

6 – The researcher (researchers) undertakes a full responsibility about the contents of the submitted research.

 

7 – The journal welcomes discussions about the published subjects where should introduce within two-month period from the date of publication, and no more than two pages. The discussions and their appropriate answers by the authors if any will be published in the subsequent published issue.

 

 

General conditions for both Arabic and English papers

  • Nomenclature, a list of symbols comes directly after the abstract.
  • Tables and Figures come at the end of the paper after References.
  • References should be written in alphabetic order as follows:

Within the text, the first name of the author followed by the published year in parentheses such as (Hong, 1992) should be written, and a full name of the author followed by the year such (Hong, JP, 1992) should be written within the list of references.

  • Within the Introduction, at least eight previous published papers need to be described.

Copyright

Submission of a manuscript implies:

  • Publishing request (the form is found on the home page)
  • Pledge researcher (the form is found on the home page)

 Pre-review Process

At first the research reviewed by editorial staff and when accepted, it insert in Turnitin research web to determine the ratio of similarity which should not exceed 20%.  Introduction and reference are not taken into consideration

Review Process

-The submitted paper will be reddening by the editorial board to determine the paper field and then send it to two peers review in the same paper field.

-The reviewers (analysis, comments, correcting) the paper.

-the paper will be send to the researcher again to modify it according to the reviewer’s evaluation, or answer them (if needed).

-when the journal receives the modifying paper, and after being sure everything is taken in the account the paper will be accepted, and then accepted certificate will be submitted to the researcher.

Fees and Charges

The fee for each research is (100$), and the payment method is (mobile transfer wire) via Western Unions Company (Altaif Office / Al-Qadisiyah /Iraq). Submitted to the journal`s account (his/her name will be given by the journal e-mail).

The fees send in two stages

  • 50$ send with the submitted research as evaluation fees
  • 50$ send after the research has been accepted as publishing fees

 

 

Porn; Porn Pics; Porn Tube; Porn Watch; Asa Akira Porn Porno izle; Porno Resim;

Creative Commons License
Al-Qadisiyah Journal For Engineering Sciences by Al-Qadisiyah Engineering collage is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Based on a work at http://qu.edu.iq/engjou.