Design of a E-Slotted Loaded Circular Microstrip Patch Antenna
Abstract
This paper presents a design of E-slot loaded circular patch microstrip antenna used for communication purposes especially in civil and military applications.The antenna has been simulated and design on Arlon AD320A (tm) substrate with dielectric constant substrates of 3.2 and optimum dimensions of 29 × 24 × 1.7 mm3.The design requirements for the antennas include a VSWR < 2 for 50 Ω reference impedance and return loss is less than to -10 dB. The proposed antenna simulation is carried out using Ansoft HFSS. The E-slot microstrip patch antenna was then fabricated using microstrip coaxial probe feed arrangement and to be determined its S11 and VSWR result. While the dual bandwidths measured for -10 dB refleection coefficient are 0.21 GHz and 0.812 GHz at range (11.9699-12.7820 GHz) or (1.6 % and 6.55%).Downloads
Download data is not yet available.
Published
2018-09-06
How to Cite
M. Shaaban, R., S.Tahir, A., M. Dawood, R., & A. Ahmed, Z. (2018). Design of a E-Slotted Loaded Circular Microstrip Patch Antenna. Al-Qadisiyah Journal of Pure Science, 23(3), 157 - 160. https://doi.org/10.29350/jops.2018.23.3.902
Issue
Section
Articles
Copyright © Author(s) . This is an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly
cited.